We are Best in Town With 50 years of Experience.

  • tiktok
Got Automation
Approved Partner

Process Instruments
Got Automation Siemens

SINAMICS G130 Chassis Units

    • SINAMICS G130 Chassis Units
      The universal converter for high power ratings
      Supply voltages : Output ranges :
      3AC 380 to 480 V 110 to 560 kW
      3AC 500 to 600 V 110 to 560 kW
      3AC 660 to 690 V 75 to 800 kW
      Supply systems : TN/TT or IT
      Line frequency : 47 to 63 Hz
      Output frequency: : 0 to 300 Hz

    • Overview
      SINAMICS G130 drive converter chassis units in frame sizes FX + HX 

      The SINAMICS G130 is a converter that can be combined very flexibly with the associated system components and integrated into customer-specific control cabinets or directly into machines. 

      The SINAMICS G130 drive converter chassis units are available for the following voltages and power ratings: 

      Line voltage                                                                        Power

      380 V … 480 V 3 AC                                                          110 kW … 560 kW

      500 V … 600 V 3 AC                                                          110 kW … 560 kW

      660 V … 690 V 3 AC                                                          75 kW … 800 kW

      A wide range of add-on electrical components allow the drive system to be optimized for specific requirements. Configuration and commissioning are greatly simplified by predefined interfaces. 

      The control accuracy of the sensorless vector control is suitable for most applications, and additional actual speed value encoders are therefore superfluous. 

      However, encoder evaluation units are available for the SINAMICS G130 converters so that they can address applications that require an encoder for plant-specific reasons. 

      Communication between the Control Unit, the Power Module and other active SINAMICS components takes place via DRIVE-CLiQ, the drive’s internal interface. The DRIVE-CliQ connections, which are available as pre-assembled cables of different lengths, allow a complete converter system to be put together quickly. 

      For communication with the process control system, with the CU320-2 either a PROFIBUS or a PROFINET interface is available as standard. There is also the option to expand the interface using digital and analog inputs and outputs. The TM31 Terminal Module and TB30 Terminal Board are provided for this purpose. Additional expansion cards can also be installed to allow communication via PROFINET and the CAN protocol.

We Offer for you

Quote Quotation

Our Customer